Devin Buhl
e1330d734c
* feat: clean up more jinja default references Signed-off-by: Devin Buhl <devin@buhl.casa> * feat: add additional tls sans force kube-vip on k3s Signed-off-by: Devin Buhl <devin@buhl.casa> --------- Signed-off-by: Devin Buhl <devin@buhl.casa>
102 lines
4.6 KiB
YAML
102 lines
4.6 KiB
YAML
---
|
|
#
|
|
# Bootstrap configuration - config.yaml is gitignored
|
|
#
|
|
|
|
# Distribution can either be 'k3s', 'k0s', or 'talos'
|
|
bootstrap_distribution: k3s
|
|
|
|
# Github username (e.g. onedr0p)
|
|
bootstrap_github_username:
|
|
# Github repository (e.g. flux-cluster-template)
|
|
bootstrap_github_repository_name:
|
|
# Github repository branch (e.g. main)
|
|
bootstrap_github_repository_branch: main
|
|
# Age Public Key (e.g. age15uzrw396e67z9wdzsxzdk7ka0g2gr3l460e0slaea563zll3hdfqwqxdta)
|
|
bootstrap_age_public_key:
|
|
# Choose your timezone (e.g. America/New_York)
|
|
bootstrap_timezone: Etc/UTC
|
|
# Email you want to be associated with the ACME account (used for TLS certificates via letsencrypt.org)
|
|
bootstrap_acme_email:
|
|
# Use the ACME production env when requesting the wildcard certificate,
|
|
# the default here is `false` which means ACME staging env will be used instead.
|
|
# This is to prevent being rate-limited. Update this option to `true` when you
|
|
# have verified the staging certificate works and then re-run `task configure`
|
|
# and push your changes to Github.
|
|
bootstrap_acme_production_enabled: false
|
|
|
|
# Flux github webhook token (openssl rand -hex 12)
|
|
bootstrap_flux_github_webhook_token:
|
|
|
|
# Cloudflare domain
|
|
bootstrap_cloudflare_domain:
|
|
# Cloudflare API Token (not API Key)
|
|
bootstrap_cloudflare_token:
|
|
# Cloudflared Account Tag (cat ~/.cloudflared/*.json | jq -r .AccountTag)
|
|
bootstrap_cloudflare_account_tag:
|
|
# Cloudflared Tunnel Secret (cat ~/.cloudflared/*.json | jq -r .TunnelSecret)
|
|
bootstrap_cloudflare_tunnel_secret:
|
|
# Cloudflared Tunnel ID (cat ~/.cloudflared/*.json | jq -r .TunnelID)
|
|
bootstrap_cloudflare_tunnel_id:
|
|
|
|
# CIDR your nodes are on (e.g. 192.168.1.0/24)
|
|
bootstrap_node_cidr:
|
|
# The IP address of the Kube API, choose an available IP in your nodes network that is not being used
|
|
# NOTE: For k0s set this to a IP you can then later use to manually setup a load balancer for the Kube API (e.g. Haproxy or Keepalived)
|
|
# Ref: https://github.com/k0sproject/k0s/issues/1150
|
|
bootstrap_kube_api_addr:
|
|
# Add additional SANs to the Kube API cert, this is useful if you want to call the Kube API by hostname rather than IP
|
|
bootstrap_kube_additional_tls_sans: []
|
|
# The Load balancer IP for k8s_gateway, choose an available IP in your nodes network that is not being used
|
|
bootstrap_k8s_gateway_addr:
|
|
# The Load balancer IP for external ingress, choose an available IP in your nodes network that is not being used
|
|
bootstrap_external_ingress_addr:
|
|
# The Load balancer IP for internal ingress, choose an available IP in your nodes network that is not being used
|
|
bootstrap_internal_ingress_addr:
|
|
|
|
# The DNS server to use for the cluster, this can be an existing local DNS server or a public one
|
|
# If using a local DNS server make sure it meets the following requirements:
|
|
# 1. your nodes can reach it
|
|
# 2. it is configured to forward requests to a public DNS server
|
|
# 3. you are not force redirecting DNS requests to it - this will break cert generation over DNS01
|
|
bootstrap_dns_server: 1.1.1.1
|
|
|
|
# (Advanced) Enable ipv6
|
|
bootstrap_ipv6_enabled: false
|
|
# For ipv6 use format "10.42.0.0/16,fd78:c889:47fb:10::/60", /60 IPv6 block is enough for 16 nodes
|
|
bootstrap_cluster_cidr: 10.42.0.0/16
|
|
# For ipv6 use format "10.43.0.0/16,fd78:c889:47fb:e0::/112"
|
|
bootstrap_service_cidr: 10.43.0.0/16
|
|
|
|
# Node information
|
|
bootstrap_nodes:
|
|
# Use only 1, 3 or more odd master nodes, recommended is 3
|
|
master:
|
|
# - name: # name or hostname of the master node (must match [a-z0-9-\.]+)
|
|
# address: # ip address of the master node
|
|
# username: # ssh username of the master node
|
|
# diskSerial: # (Required: Talos) Serial number of Disk for this master node
|
|
# ...
|
|
worker: # set to [] or omit if no workers are needed
|
|
# - name: # name or hostname of the worker node (must match [a-z0-9-\.]+)
|
|
# address: # ip address of the worker node
|
|
# username: # ssh username of the worker node
|
|
# diskSerial: # (Required: Talos) Serial number of Disk for this worker node
|
|
# ...
|
|
|
|
#
|
|
# Do not make changes below this line unless you know what you are doing
|
|
# These options are not validated and may break your cluster
|
|
#
|
|
|
|
# bootstrap_advanced_flags:
|
|
# # Disable to prevent changes to nodes /etc/resolv.conf
|
|
# update_resolv_conf: true
|
|
# # Cilium load balancer mode, choose either 'dsr' or 'snat'
|
|
# # Due to unknown reasons some people need this set to 'snat' in order
|
|
# # for Cilium L2 announcements to work properly. Keep this dsr unless
|
|
# # you have issues with connecting to Cilium L2 announcements.
|
|
# cilium_loadbalancer_mode: dsr
|
|
# # Path for openebs openebs-hostpath to use for storage on ALL nodes
|
|
# local_storage_path: /var/openebs/local
|