157 lines
7.5 KiB
YAML
157 lines
7.5 KiB
YAML
---
|
|
# (Required) Distribution can either be k3s, k0s, or talos
|
|
distribution: ""
|
|
|
|
# (Required) IANA formatted timezone (e.g. America/New_York)
|
|
timezone: ""
|
|
|
|
# (Required) Cluster details
|
|
cluster:
|
|
# (Required) The nodes section is used to configure your cluster nodes
|
|
nodes:
|
|
# (Required) CIDR your nodes are on (e.g. 192.168.1.0/24)
|
|
host_network: ""
|
|
# (Required) The DNS server to use for the cluster, this can be an existing
|
|
# local DNS server or a public one
|
|
# If using a local DNS server make sure it meets the following requirements:
|
|
# 1. your nodes can reach it
|
|
# 2. it is configured to forward requests to a public DNS server
|
|
# 3. you are not force redirecting DNS requests to it - this will break cert generation over DNS01
|
|
# If using multiple DNS servers make sure they are setup the same way, there is no
|
|
# guarantee that the first DNS server will always be used for every lookup.
|
|
dns_servers:
|
|
- "1.1.1.1"
|
|
# (Optional) The DNS search domain to use for the nodes.
|
|
# Leave this option blank to avoid possible DNS issues inside the cluster.
|
|
search_domain: ""
|
|
# (Required) Use only 1, 3 or more ODD number of controller nodes, recommended is 3
|
|
# Worker nodes are optional
|
|
inventory: []
|
|
# - name: "" # Name of the node (must match [a-z0-9-\.]+)
|
|
# address: "" # IP address of the node
|
|
# controller: true # (Required) Set to true if this is a controller node
|
|
# ssh_username: "" # (Required: k3s/k0s) SSH username of the node
|
|
# talos_disk_device: "" # (Required: Talos) Device Path or Serial number of Disk for this node
|
|
# ...
|
|
# (Optional) Talos Specific Options
|
|
talos: {}
|
|
# schematics:
|
|
# # (Required) Disabling the schematic will disable the system-upgrade-controller and any
|
|
# # additional customizations you have defined.
|
|
# enabled: false
|
|
# # (Required) For use with the system-upgrade-controller generate a schematic ID
|
|
# # based on your System Extension requirements https://factory.talos.dev/
|
|
# id: ""
|
|
# # (Required) Additional NodeConfigs to apply to all nodes
|
|
# # See: https://budimanjojo.github.io/talhelper/latest/reference/configuration/#nodeconfigs
|
|
# customization: |-
|
|
# extraKernelArgs:
|
|
# - net.ifnames=0
|
|
# systemExtensions:
|
|
# officialExtensions:
|
|
# - siderolabs/intel-ucode
|
|
# - siderolabs/i915-ucode
|
|
# # (Optional) Add vlan tag to network master device
|
|
# # See: https://www.talos.dev/latest/advanced/advanced-networking/#vlans
|
|
# vlan: 1
|
|
# (Required) The pod CIDR for the cluster, this must NOT overlap with any
|
|
# existing networks and is usually a /16 (64K IPs).
|
|
# If you want to use IPv6 check the advanced flags below
|
|
pod_network: 10.69.0.0/16
|
|
# (Required) The service CIDR for the cluster, this must NOT overlap with any
|
|
# existing networks and is usually a /16 (64K IPs).
|
|
# If you want to use IPv6 check the advanced flags below
|
|
service_network: 10.96.0.0/16
|
|
# (Required) The IP address of the Kube API, choose an available IP in
|
|
# your nodes host network that is NOT being used. This is announced over L2.
|
|
endpoint_vip: ""
|
|
# (Optional) Add additional SANs to the Kube API cert, this is useful
|
|
# if you want to call the Kube API by hostname rather than IP
|
|
tls_sans: []
|
|
|
|
# (Required) Flux details
|
|
# IMPORTANT: All options are ignored if flux is disabled and no resources
|
|
# outside Cilium and kube-vip (k0s/k3s) will be deployed to your cluster.
|
|
flux:
|
|
# (Required) Disable to use a different tool (e.g. kubectl, Argo, Kluctl)
|
|
enabled: true
|
|
# (Required) Options for Github
|
|
github:
|
|
# (Required) Github repository URL (for private repos use the ssh:// URL)
|
|
address: ""
|
|
# (Required) Github repository branch
|
|
branch: main
|
|
# (Required) Options for Flux Github webhook
|
|
webhook:
|
|
# (Required) Enable to use Github push-based sync
|
|
enabled: true
|
|
# Token for Github push-based sync (openssl rand -hex 16)
|
|
token: ""
|
|
# (Required) Private key for Flux to access the Github repository
|
|
private:
|
|
# (Required) Enable to use a private Github repository
|
|
enabled: false
|
|
# Private key for Flux to access the Github repository
|
|
# 1. Generate a new key with the following command:
|
|
# ssh-keygen -t ecdsa -b 521 -C "github-deploy-key" -f github-deploy.key -q -P ""
|
|
# 2. Make sure to paste public key from "github-deploy.key.pub"
|
|
# into the deploy keys section of your repository settings
|
|
# 3. Uncomment and paste the private key below
|
|
# key: |
|
|
# -----BEGIN OPENSSH PRIVATE KEY-----
|
|
# ...
|
|
# -----END OPENSSH PRIVATE KEY-----
|
|
|
|
# (Required) Age Public Key (e.g. age15uzrw396e67z9wdzsxzdk7ka0g2gr3l460e0slaea563zll3hdfqwqxdta)
|
|
sops_age_public_key: ""
|
|
|
|
# (Required) Cloudflare details - Cloudflare is used for DNS, TLS certificates and tunneling.
|
|
# IMPORTANT: All options are ignored if cloudflare is disabled and no resources
|
|
# outside a bare Flux setup will be deployed to your cluster if Flux is enabled.
|
|
cloudflare:
|
|
# (Required) Disable to use a different DNS provider
|
|
enabled: true
|
|
# (Required) Cloudflare Domain
|
|
domain: ""
|
|
# (Required) Cloudflare API Token (NOT API Key)
|
|
token: ""
|
|
# (Required) Optionals for Cloudflare Acme
|
|
acme:
|
|
# (Required) Email you want to be associated with the ACME account (used for TLS certs via letsencrypt.org)
|
|
email: ""
|
|
# (Required) Use the ACME production server when requesting the wildcard certificate.
|
|
# By default the ACME staging server is used. This is to prevent being rate-limited.
|
|
# Update this option to `true` when you have verified the staging certificate
|
|
# works and then re-run `task configure` and push your changes to Github.
|
|
production: false
|
|
# (Required) Provide LAN access to the cluster ingresses for internal ingress classes
|
|
# The Load balancer IP for internal ingress, choose an available IP
|
|
# in your nodes host network that is NOT being used. This is announced over L2.
|
|
ingress_vip: ""
|
|
# (Required) Gateway is used for providing DNS to your cluster on LAN
|
|
# The Load balancer IP for k8s_gateway, choose an available IP
|
|
# in your nodes host network that is NOT being used. This is announced over L2.
|
|
gateway_vip: ""
|
|
# (Required) Options for Cloudflare Tunnel
|
|
tunnel:
|
|
# (Required) Cloudflare Account ID (cat ~/.cloudflared/*.json | jq -r .AccountTag)
|
|
account_id: ""
|
|
# (Required) Cloudflared Tunnel ID (cat ~/.cloudflared/*.json | jq -r .TunnelID)
|
|
id: ""
|
|
# (Required) Cloudflared Tunnel Secret (cat ~/.cloudflared/*.json | jq -r .TunnelSecret)
|
|
secret: ""
|
|
# (Required) Provide WAN access to the cluster ingresses for external ingress classes
|
|
# The Load balancer IP for external ingress, choose an available IP
|
|
# in your nodes host network that is NOT being used. This is announced over L2.
|
|
ingress_vip: ""
|
|
|
|
# (Optional) Feature gates are used to enable experimental features
|
|
feature_gates:
|
|
# Enable Dual Stack IPv4 first
|
|
# IMPORTANT: I am looking for people to help maintain IPv6 support since I cannot test it.
|
|
# Ref: https://github.com/onedr0p/cluster-template/issues/1148
|
|
# Keep in mind that Cilium does not currently support IPv6 L2 announcements.
|
|
# Make sure you set cluster.pod_cidr and cluster.service_cidr
|
|
# to a valid dual stack CIDRs, e.g. "10.42.0.0/16,fd00:10:244::/64"
|
|
dual_stack_ipv4_first: false
|