feat(bootstrap): static ips and default ntp/dns servers (#1618)

This commit is contained in:
Devin Buhl authored and GitHub committed 2024-10-29 10:10:31 -04:00
1 parent 48a7a16f90
commit e5a7ba8da8
7 files changed
+32 -47

No files matched your search

+11 -14
View File
@@ -5,7 +5,7 @@
#
# (Optional) Cluster name; affects Cilium and Talos
# Default is "home-kubernetes"
# DEFAULT: "home-kubernetes"
bootstrap_cluster_name: ""
# (Required) Generated schematic id from https://factory.talos.dev/
@@ -18,12 +18,12 @@ bootstrap_node_network: ""
# Worker nodes are optional
bootstrap_node_inventory: []
# - name: "" # (Required) Name of the node (must match [a-z0-9-\]+)
# address: "" # (Optional) IP address of the node (Remove if node has a static DHCP reservation)
# address: "" # (Optional) IP address of the node
# controller: true # (Required) Set to true if this is a controller node
# disk: "" # (Required) Device path or serial number of the disk for this node (talosctl disks -n <ip> --insecure)
# mac_addr: "" # (Required) MAC address of the NIC for this node (talosctl get links -n <ip> --insecure)
# schematic_id: "" # (Optional) Override the 'bootstrap_schematic_id' with a node specific schematic ID from https://factory.talos.dev/
# mtu: "" # (Optional) MTU for the NIC, default is 1500
# mtu: "" # (Optional) MTU for the NIC. DEFAULT: 1500
# manifests: # (Optional) Additional manifests to include after MachineConfig
# - extra.yaml # Ref: https://www.talos.dev/v1.7/reference/configuration/extensions/extensionserviceconfig/
# extension_services: # (Optional) Additional talhelper ExtensionServices (supports talenv.sops.yaml envsubst)
@@ -36,18 +36,15 @@ bootstrap_node_inventory: []
# - key=value
# ...
# (Optional) The DNS servers to use for the cluster nodes.
# Default is pulled from your DHCP server.
# The DNS servers to use for the cluster nodes.
# DEFAULT: [1.1.1.1, 1.0.0.1]
# If using a local DNS server make sure it meets the following requirements:
# 1. your nodes can reach it
# 2. it is configured to forward requests to a public DNS server
# 3. you are not force redirecting DNS requests to it - this will break cert generation over DNS01
# If using multiple DNS servers make sure they are setup the same way, there is no
# guarantee that the first DNS server will always be used for every lookup.
bootstrap_dns_servers: []
# (Optional) The NTP servers to use for the cluster nodes.
# Default is pulled from your DHCP server.
# The NTP servers to use for the cluster nodes.
# DEFAULT: [time.cloudflare.com]
bootstrap_ntp_servers: []
# (Required) The pod CIDR for the cluster, this must NOT overlap with any
@@ -71,7 +68,7 @@ bootstrap_controller_vip: ""
bootstrap_tls_sans: []
# (Optional) The default gateway for the nodes
# Default is derrived from bootstrap_node_network (e.g. 192.168.1.1)
# DEFAULT: .1 derrived from bootstrap_node_network (e.g. 192.168.1.1)
bootstrap_node_default_gateway: ""
# (Optional) Add vlan tag to network master device, leave blank if you tag ports on your switch instead
@@ -90,13 +87,13 @@ bootstrap_age_pubkey: ""
bootstrap_bgp:
enabled: false
# (Optional) If using multiple BGP peers add them here.
# Default is .1 derrived from host_network: ['x.x.x.1']
# DEFAULT: .1 derrived from host_network: ['x.x.x.1']
peers: []
# (Required) Set the BGP Autonomous System Number for the router(s) and nodes.
# If these match, iBGP will be used. If not, eBGP will be used.
peer_asn: "" # Router(s) AS
local_asn: "" # Node(s) AS
peer_port: 179 # BGP Port - default is TCP port 179
peer_port: 179 # BGP Port. DEFAULT: 179
# (Required) The advertised CIDR for the cluster, this must NOT overlap with any
# existing networks and is usually a /16 (64K IPs).
# If you want to use IPv6 check the advanced flags below
@@ -112,7 +109,7 @@ bootstrap_secureboot:
encrypt_disk_with_tpm: false
# (Optional) Change Cilium load balancer mode
# Default is "dsr" (Direct Server Return)
# DEFAULT: "dsr"
# Ref: https://docs.cilium.io/en/stable/network/kubernetes/kubeproxy-free/
bootstrap_loadbalancer_mode: ""